Oregon 16" Chainsaw Chain Loop (91VG-56 Drive Links) 3/8" Low Profile
Oregon 91VG is commonly found on small consumer saws. This chain has guard links on the tie straps, so it is ANSI approved as a low kickback chain. This makes 91VG an excellent choice for casual users. 91VG chain is .375 pitch, .050 gauge (1.3mm), low profile. 91VG will fit saws using Stihl 63 PM chains. Sharpens with a 5/32" round file or 1/8" grinding wheel.
WARNING:Failure to use this chain on bars with nose radii of 12mm or smaller can result in severe kickback.
NOTE : You must order the number of Drive links you have on your old chain
Pitch 3/8" Low Profile
Gauge .050" (1.3mm)
Drive Links: 56
Cutter Type Micro Chisel
Recommended Saw Sizes up to 2.3 cubic inches (38cc)
Kickback Reduction Features None
ANSI Approved Low Kickback Chain No
WARNING:This Oregon saw chain is capable of kickback and could result in serious injury to the saw operator or bystanders. Do not use this chain unless you are experienced in dealing with kickback. Saw chain with reduced kickback potential is available.